E3327

6000W S-band (2450 MHz) water cooled industrial magnetron

E3327 is a 2450 MHz continuous wave magnetron designed for industrial heating applications.

It has packaged Magnet & sub-electromagnet for stabilizing & controlling the output power. it can deliver the output 6KW with matched load.

During operation, it require the continuous water supply to maintain the anode temperature of the magnetron. It also require the forced air cooling for output antenna & filter box.

It has tungsten filament which is very brittle material therefore it is advisable to avoid any mechanical shock to the magnetron.

The magnetron should be mounted in vertical position. Its antenna should always be in either upward or downward direction.

It is advisable to use three phase full wave rectified power supply with chock coil (1 – 3H) to supress the peak anode current.

It is available in following mounting positions
– Connector is not in direction of water-connection & mounting

This magnetron is also known by part number YJ1600

Magnetron Perfomance Chart

Typical Parameter
Frequency of operation:	2460 MHz
Frequency variations:	±10 MHz
CW Power output	6000 W
Anode voltage:	4.50 kV
Anode current:	950 mA
Filament voltage	5.0 V
Filament current:	33 A

OUTLINE DIAGRAM

Specifications
Frequency of operation:	2450 MHz – 2470 MHz
Anode voltage:	Max. 7.2 kV
Anode current:	Max. 1250 mA
Filament voltage	4.5 V – 5.5 V
Filament current:	20 A – 24 A
Net weight:	Weight 4.30Kg
Cooling Anode: Filter box & output antenna:	Water Forced Air