Description
3000W S-band (2450 MHz) water cooled industrial magnetron
E3328 is a 2450 MHz continuous wave magnetron designed for industrial heating applications.
It has packaged Magnet & sub-electromagnet for stabilizing & controlling the output power. It can deliver the output 3KW with matched load.
During operation, it require the continuous water supply to maintain the anode temperature of the magnetron. It also require the forced air cooling for filter box. Output dome also require forced air cooling for the case of severe microwave load condition.
It has tungsten filament which is very brittle material therefore it is advisable to avoid any mechanical shock to the magnetron.
The magnetron should be mounted in vertical position. Its antenna should always be in either upward or downward direction.
It is advisable to use single phase full wave doubler power source without filter.
It is available in following mounting positions
– Connector is not in direction of water-connections & mounting
Magnetron Perfomance Chart
| Typical Parameter | |
|---|---|
| Frequency of operation: | 2460 MHz |
| Frequency variations: | ±10 MHz |
| CW Power output | 3000 W |
| Anode voltage: | 4.70 kV |
| Anode current: | 1050 mA |
| Filament voltage | 4.6 V |
| Filament current: | 19 A |
OUTLINE DIAGRAM
| Specifications | |
|---|---|
| Frequency of operation: | 2450 MHz – 2470 MHz |
| Anode voltage: | Max. 5.0 kV |
| Anode current: | Max. 1600 mA |
| Filament voltage | 4.4 V – 4.8 V |
| Filament current: | 20 A – 24 A |
| Net weight: | Weight 2.60Kg |
Reviews
There are no reviews yet.