Description
3000W S-band (2450 MHz) Water Cooled INDUSTRIAL MAGNETRON
2M265-M12WJ is a 2450 MHz continuous wave magnetron designed for industrial heating applications.
It has packaged Magnet & can deliver the output upto 3KW with matched load.
During operation, it require the continuous water supply to maintain the temperature of the magnetron. It has tungsten filament which is very brittle material therefore it is advisable to avoid any mechanical shock to the magnetron.
The magnetron should be mounted in vertical position. Its antenna should always be in either upward or downward direction.
It is advisable to supply constant current at the anode of the magnetron as magnetron anode current is very sensitive to the anode voltage fluctuations. A full wave rectifier or voltage -doubler is recommended for anode supply.
It is available in following mounting positions
– Connector, airflow & mounting all in same direction
This magnetron is also known by part number NL10230, NL10230-6, NL10230-1A & 10207. The alternate part number depends on various water connection fitings.
Magnetron Perfomance Chart
| Typical Parameter | |
|---|---|
| Frequency of operation: | 2455 MHz |
| Frequency variations: | +/-15 MHz |
| CW Power output | 3 kW |
| Anode voltage: | 5.1 kV |
| Anode current: | 840 mA |
| Filament voltage | 4.0 V |
| Filament current: | 22 A |
OUTLINE DIAGRAM
| Specifications | |
|---|---|
| Frequency of operation: | 2440 MHz – 2470 MHz |
| Anode voltage: | 4.9 kV – 5.3 kV |
| Anode current: | Max. 900 mA |
| Filament voltage | 3.8 V – 4.4 V |
| Filament current: | 20 A – 24 A |
| Cooling water flow rate: | 3 l/min ; 3 bar |
| Net weight: | Approx. 3.7 kg |
Reviews
There are no reviews yet.